3rdGen Heating & Cooling

[ 01 ] Full-system upgrades

Full-System HVAC Replacement for Bay Area Homes

3rdGen is not built around minor repairs or emergency equipment swaps. We are best suited for full-system replacement projects where sizing, ductwork, equipment selection, comfort, zoning, or electrification matter.

Plan a System Upgrade All residential services

Approach

Replace the system, not just the box

Most contractors quote replacement using the nameplate on your existing unit. We treat full-system HVAC replacement as a design-build scope: load calculations, duct assessment, zoning strategy, and equipment selected to match how your home actually performs — including heat pump and all-electric upgrade paths.

What's included

Design-build scope

  • Complete HVAC system replacement and whole-home assessment
  • Heat pump replacement and furnace-to-heat-pump upgrades
  • Ductwork upgrades, equipment resizing, and zoning improvements
  • Comfort correction for uneven temperatures between floors or rooms
  • Manual J/S/D where the scope requires engineering
  • Permit and Title 24 coordination
  • Documentation for rebates and financing where applicable

Manual J · S · D

Designed Before It's Installed: Manual J, S & D

Manual J/S/D helps ensure equipment sizing, system selection, duct design, and comfort decisions are based on the actual home rather than guesswork. Manual J determines load. Manual S matches equipment. Manual D supports duct and airflow design — for heat pumps, remodels, new construction, and full-system replacements.

Manual J — Heating & cooling loads

Manual J determines the heating and cooling load for each room and for the home as a whole.

Manual J helps determine what the home actually needs, instead of guessing based on square footage or existing equipment size.

What goes into it

  • Floor area
  • Room-by-room dimensions
  • Ceiling height
  • Orientation
  • Window area
  • Window U-factor / SHGC
  • Insulation levels
  • Infiltration / air leakage assumptions
  • Internal gains
  • Occupancy assumptions
  • Local design temperatures
  • Duct location and losses
  • Envelope conditions
  • Zoning strategy

Manual S — Equipment selection

Manual S matches HVAC equipment capacity to Manual J results — not nameplate tonnage alone.

Manual S helps select equipment that can actually perform correctly in the home’s conditions.

What goes into it

  • Equipment capacity is not just nameplate tonnage
  • Heat pump capacity changes with outdoor temperature
  • Equipment must be matched against calculated heating and cooling loads
  • Oversizing can cause short cycling
  • Undersizing can fail to meet design load
  • Proper matching affects comfort, noise, efficiency, and lifespan

Manual D — Duct & airflow design

Manual D supports duct sizing, layout, and airflow so conditioned air reaches each room.

Even the right equipment can perform poorly if the ductwork and airflow path are wrong.

What goes into it

  • Duct sizing
  • Static pressure
  • Supply airflow
  • Return airflow
  • Room-by-room CFM needs
  • Duct transitions
  • Register placement
  • Flex duct limitations
  • Return path issues
  • Air balancing
  • Noise and velocity considerations

Learn how Manual J/S/D applies to your project →

Why it matters for homeowners

  • Avoid oversized equipment
  • Reduce short cycling
  • Improve room-to-room comfort
  • Improve heat pump performance
  • Reduce noise
  • Improve airflow
  • Support rebate and permit documentation
  • Make the proposal more transparent

Real work

Field Projects & Install Quality

Selected Bay Area field work across residential, commercial, and multifamily scopes — outdoor equipment, distribution systems, remodel rough-ins, and finished commissioning.

  • Outdoor equipment
  • Indoor heads
  • Ducted systems
  • Attic/crawlspace installs
  • ADUs
  • Remodel rough-ins
  • Finished installs
  • Before/after replacements
  • Tight-space solutions
  • Crew/action photos
  • Design/calculation screenshots
View all work →

Process

How a project moves

  1. 01

    Tell us about your home

    Share location, timeline, plans if you have them, and what is not working today — or what your builder has scoped.

  2. 02

    Size & design the system

    We use Manual J, S, and D where the project needs it to match equipment, ducts, and zoning to the actual house.

  3. 03

    Coordinate & install

    Principal-led field work with your GC or architect around access, finishes, sequencing, and clean rough-in.

  4. 04

    Startup & handoff

    System startup, basic orientation, and documentation so you know how the new system is meant to run.

Related

Explore more

Services

Service areas

FAQ

Common questions

Heat Pumps

Can a heat pump replace my furnace?

Yes — whole-home gas-to-electric conversions are a core part of our work. We size heat pumps for calculated heating and cooling loads, plan electrical capacity, and coordinate distribution — not a same-size swap based on your old furnace label.

Do heat pumps work in Bay Area weather?

Modern cold-climate heat pumps perform well in Bay Area winters and summers when sized with Manual J and installed with proper distribution. Coastal microclimates and inland heat spikes are why we engineer each home — not assume one product fits all.

What brands do you install?

We are Mitsubishi Electric specialists and design around the best technology for your home — ducted, ductless, or mixed layouts sized with Manual J/S/D, not rule-of-thumb equipment swaps.

Load Calculations

What is a Manual J load calculation?

Manual J is the ACCA standard for calculating heating and cooling loads room by room based on your home’s envelope, windows, orientation, and local climate — not square footage rules of thumb. We use it to size equipment and duct systems so your system performs in real Bay Area conditions.

Why not size HVAC equipment by square footage?

Square-footage rules ignore insulation quality, window area, shading, air leakage, and how your home actually gains and loses heat. Oversized equipment short-cycles, wastes energy, and struggles with comfort and humidity. Manual J matches capacity to measured loads.

What are Manual S and Manual D?

Manual S selects HVAC equipment that matches Manual J loads without oversizing. Manual D sizes and lays out duct systems for proper airflow and static pressure. Together with Manual J, they form the engineering backbone of our design-build installs.

Process

Do you help with permits?

Yes. Permit, Title 24, and inspection coordination are part of our design-build scope — not a surprise add-on at the end. We retain load calc and equipment documentation your jurisdiction and rebate programs commonly require.

Do you offer HVAC repair, maintenance, or emergency service?

No. We focus on project-based residential HVAC — heat pump installations, full-system replacements, remodels, retrofits, new construction, and ADUs. We do not provide emergency repair, routine maintenance, tune-ups, filter changes, or small service calls.

Contact

Discuss a Residential Project

Share your city, timeline, and a short description of the scope. If it looks like a fit, a principal will follow up within one business day.

Best-fit residential scopes include heat pump installations, all-electric conversions, full-system HVAC replacements, retrofits, remodels, new construction, ADUs, and Manual J/S/D-supported design-build work. 3rdGen is not structured around emergency repair, routine maintenance, tune-ups, filter changes, or small service calls.