Do heat pumps cool well enough for Hayward summers?
Yes. ACCA summer design for Hayward is about 82°F. A correctly sized heat pump handles that and heats on cool nights. We check capacity at both conditions.
RESIDENTIAL HVAC · HAYWARD, CA
We replace gas furnaces and old AC with right-sized heat pumps in Hayward houses, and we fix the ducts that come with them. Every project starts with a Manual J that accounts for Hayward’s warm afternoons and cool nights.
Remodels · Retrofits · Heat Pumps · Multi-Zone Systems
Project Inquiry
Thanks — your project details are on their way to 3rdGen. We’ll review them and follow up about the next step.
Hayward scopes
Hayward has tract homes, older bungalows and new infill, and the same few jobs come up again and again. Here are the ones we price and install.
Replacement
A ducted heat pump replaces the garage furnace and any aging AC, with the gas capped and the panel reviewed under one permit.
Replacement & conversionDucts
Resized and sealed attic ducts for houses where hot rooms in summer and cold rooms in winter come from the distribution.
Ducted heat pumpsDuctless
Ductless heads for converted garages, additions and sunrooms that the central system never reached.
Ductless & multi-zoneADU
A quiet single-zone system for a detached unit, with a load calculation the permit will accept.
ADU heating & coolingNew build
Complete mechanical design for new houses and rebuilds, from loads to equipment layout and ventilation.
HVAC for new constructionHills
Zoned equipment and filtration for houses above Mission Boulevard with large windows and smoke exposure.
Ventilation & IAQReference project
High-end residential remodel
This job was in Berkeley, not Hayward. It is an example of how we plan multi-zone ductless work where outdoor placement and indoor routing are tight.
The six-zone Fujitsu ductless system was installed, permitted, inspected, and completed as part of the home’s remodel-for-sale scope — delivering zoned heating and cooling without a conventional ducted retrofit.
Representative example from a Berkeley, CA remodel, not a project in this city. Photos and full details on the project page.
View projectLocal projects
Recent installs by the 3rdGen crew that serves Hayward: ducted and ductless heat pumps, air handlers and ductwork.
Hayward housing
Hayward’s Housing Plan notes that most of the city’s housing stock is more than 30 years old. In the flats that usually means a 1950s to 1980s tract house with a furnace in the garage, ducts in the attic and a lot of west-facing glass.
With 82°F summer design and 39°F winter design, the heat pump has to do both jobs. We size to the larger load, check the other, and rework the distribution so rooms balance.
Afternoon winds and dust mean we look carefully at outdoor-unit placement, and the hills bring slopes, stairs and smoke to plan for.
Attic ducts are often undersized or leaky. We test before reusing any of them.
Large sliding doors and windows push afternoon cooling loads, so orientation drives the Manual J.
Rooms with no ducted air usually do best with a dedicated ductless head.
Slopes, stairs and smoke exposure shape equipment locations and filtration.
HVAC design in Hayward
Hayward is a big, varied city. The flats have rows of mid-century tract homes with a furnace in the garage and ducts in the attic. The hills have view homes on slopes. Afternoon winds off the bay are strong, and summers run warmer than in Oakland or Berkeley. A heat pump here needs real cooling capacity and a layout that suits the house.
ACCA lists Hayward at 39°F for winter and 82°F for summer, with a 20°F daily range. Cooling hours are more significant than on the bay-hugging side of the East Bay, so the cooling side of the heat pump needs as much attention as the heating side.
ACCA Manual J design data · Hayward Air Terminal
Hayward’s Housing Plan notes that most of the city’s housing stock is more than 30 years old. Much of it is 1950s to 1980s tract housing: one- and two-story stucco homes with attic ducts, single-pane or early double-pane windows and gas furnaces.
Older neighborhoods near downtown and the Burbank and Jackson Triangle areas have bungalows and pre-war houses with raised floors and wall heaters.
Hillside houses above Mission Boulevard add slopes, stairs and views with large windows, and have some wildfire-smoke exposure.
Many Hayward houses have sliding doors and large windows facing the back yard. Sun on those windows drives the afternoon load, so we model orientation and shading explicitly.
At 82°F summer design, a heat pump needs to cool well and heat well. We compare the cooling and heating capacity at design conditions and select equipment on the larger demand, then check the other.
Attic ducts in older tract homes are often undersized and uninsulated. We check what is there and decide on cleanup, replacement or a new layout based on the airflow each room needs.
Afternoon winds are common in Hayward. We place outdoor units to keep airflow clear and avoid dust and debris near coils, and we consider noise near a neighbor’s fence.
Swap a garage furnace and old AC for a ducted heat pump, reusing the same location where it makes sense.
Replacement & conversion →New or resized attic ducts sized from a Manual D, with sealed joints and proper insulation.
Heat pump installation →Mini-splits for rooms that were added or converted and never got ducted air.
Ductless & multi-zone →A heat pump for a detached unit on Hayward’s deeper lots, with the load calculation attached to the permit.
ADU heating & cooling →Full mechanical design for new houses and infill projects, from load calc to equipment layout.
HVAC for new construction →Load calculations for permits, plan sets and replacement quotes.
Manual J load calculations →Mitsubishi Diamond Contractor installation with extended coverage on qualifying systems.
Diamond Contractor →Heat pump installs in Hayward are permitted through the City of Hayward’s building division. We prepare the equipment data, Title 24 documents and load calculation for the permit and handle the inspection scheduling.
Hayward is an Ava Community Energy city, with PG&E delivering. Rebates from TECH Clean California, BayREN and utility programs open and close, and some depend on income or equipment. We check what applies when we scope your job. Our rebates page covers the general picture.
Central Hayward and the downtown area, Burbank and Jackson Triangle, the hill neighborhoods above Mission Boulevard, Fairway Park, Mt. Eden and the nearby cities of San Leandro, Castro Valley and Union City.
Homeowner reviews
207 Google reviews
Expand
Mitsubishi mini-split installed with outstanding care. Indoor and outdoor units done right. High efficiency meant a meaningful federal tax credit too.
Expand
Devin and his crew did a fantastic job installing AC for our whole house. High quality Mitsubishi equipment and a clean installation throughout.
Expand
Devin is meticulous, methodical, and knowledgeable. Professional crew and a heat pump install we trust completely.
Photos from the installs above
Read all 207 reviewsHayward project steps
We work in a set order so each step supports the next: loads, equipment, ducts, permit, install, verification.
We inspect the furnace location, attic, ducts, windows, panel and any additions or conversions.
Heating and cooling loads by room with Hayward’s design temperatures and your windows’ orientation.
Equipment chosen to meet both heating and cooling demand at design conditions from manufacturer data.
Attic duct layout or ductless line-set plan drawn, then submitted with the City of Hayward permit documents.
Furnace removed, gas capped, ducts repaired or replaced, outdoor unit set with clear airflow.
Duct leakage, airflow and charge tested, inspection passed, and controls explained.
Install and verification
We test duct leakage where ducts are reused, set up the outdoor unit with clear airflow and verify refrigerant charge and airflow when we finish.
The panel and gas work are planned together so you are not waiting on a second visit.
Tell us about the projectOld furnace and AC removed and the gas line capped.
Ducts repaired or replaced and sealed to the design.
Pad set with airflow, drainage and noise in mind.
Airflow and charge tested and recorded for the inspector.
Cost
Square footage matters less than the state of the ducts, the number of zones, the panel and the access. Tract homes with a clean attic and spare panel capacity tend to be straightforward. Hill homes with long stair carries and old wiring are not.
Prices as of November 2026. Complex whole-home and design-build projects can exceed these ranges. Rebates and incentives may reduce your net project cost.
Hayward estimates
Let us know the neighborhood, the age of the house, what heats it now and which rooms are hot or cold. Photos of the furnace, attic and panel help.
Project Inquiry
Thanks — your project details are on their way to 3rdGen. We’ll review them and follow up about the next step.
Working with your team
On Hayward additions, ADUs and infill projects, we hand your contractor load calculations and mechanical layouts early so the framing, electrical and HVAC all agree.
We work with project teams in Hayward and across the East Bay, or directly with homeowners.
Mechanical systems coordinated around architecture, ceiling conditions, equipment locations, routing, and finish requirements.
Explore HVAC for architectsClear scope, scheduling, rough-in coordination, submittals, inspections, startup, and project handoff.
Explore HVAC for builders & GCsField execution, equipment selection, controls coordination, submittals, installation, and commissioning aligned with the mechanical design.
Explore engineering coordinationAlready assembling your own project team? We can take ownership of the mechanical scope and coordinate directly with the other professionals involved.
Start a residential projectMitsubishi Electric
As a Mitsubishi Electric Diamond Contractor, we design and install ducted, ductless, and multi-zone systems for Bay Area homes, with factory-trained crews and longer warranty options on qualifying residential installs.
Mitsubishi is not automatically the answer to every home. We start with what the project requires and recommend the system that makes sense.
12 Year Parts &
Compressor Warranty
Extended parts & compressor coverage on qualifying Diamond installations.
Ongoing manufacturer training on the latest hyper-heat systems.
Direct factory escalation if anything ever needs attention.
FAQ
What Hayward homeowners ask about cooling, ducts, permits and panels.
Yes. ACCA summer design for Hayward is about 82°F. A correctly sized heat pump handles that and heats on cool nights. We check capacity at both conditions.
We test the ducts. If they are sound, we reuse them. If they are undersized or leaky, we repair or replace them. The new air handler can often go in the same spot as the furnace.
Usually west glass plus a long duct run. A load calc and duct design can fix it with more airflow, better returns or a separate zone.
Yes. A ductless head sized to that room avoids stretching the main system.
Yes. Heat pump installs need mechanical and typically electrical permits through the City. We submit them and schedule inspections.
Ava Community Energy is the default generation provider and PG&E delivers it. Rebates change, so we check TECH Clean California, BayREN and utility programs when we quote. We do not promise amounts.
Maybe. We calculate it with the heat pump and anything else you plan to add, like EV charging.
Not usually, but placement matters. We keep coils clear of debris and choose a spot that works for airflow and for your neighbors.
Nearby service areas
Project Inquiry
Thanks — your project details are on their way to 3rdGen. We’ll review them and follow up about the next step.