RESIDENTIAL HVAC · CONCORD, CA

Residential HVAC & Heat Pumps in Concord, CA

Concord is hot in summer and mild in winter, so cooling capacity decides the system. We calculate loads for Concord’s real design temperatures, then install a heat pump with ducts that can deliver that capacity.

Remodels · Retrofits · Heat Pumps · Multi-Zone Systems

Project Inquiry

Plan your Concord project

Share your project type, ZIP, timeline, and how to reach you. We will follow up.

We design and install complete systems in the East Bay, San Francisco and Marin. We do not do repair, service calls or maintenance.

  • 5.0 Google Rating 5.0 out of 5 stars
  • Mitsubishi Electric Diamond Contractor
  • C-20 + C-36 Licensed & Bonded
  • Serving the Bay Area since 2015

Reference East Bay project

Whole-home heat pump remodel

View project →
Mitsubishi wall unit in a Berkeley remodel by 3rdGen
Mitsubishi wall unit in a Berkeley remodel by 3rdGen
Mitsubishi hanging outdoor units in a Berkeley remodel by 3rdGen

High-end residential remodel

Hearst Remodel

This Berkeley job is not in Concord. It illustrates the load planning and installation detail we apply to Concord homes as well.

Home type
Existing home, remodel for sale
System
Fujitsu multi-zone ductless heat pump
Mechanical scope
  • · Six indoor wall units
  • · Two outdoor units
  • · Wall-mounted outdoor brackets
  • · Refrigerant routing and field coordination

Challenge

  • Existing older home with limited equipment placement options
  • Outdoor units required side-yard wall bracket mounting
  • Finish-sensitive interior installation
  • Coordination with the general contractor’s remodel schedule

3RDGEN scope

  • Six-zone ductless heat pump installation
  • GC-led remodel coordination
  • Permit and inspection support
  • Startup as part of the completed remodel scope

Outcome

The six-zone Fujitsu ductless system was installed, permitted, inspected, and completed as part of the home’s remodel-for-sale scope — delivering zoned heating and cooling without a conventional ducted retrofit.

Representative example from a Berkeley, CA remodel, not a project in this city. Photos and full details on the project page.

View project

Local projects

Heat pump & HVAC installs for Concord homes

Recent installs by the 3rdGen crew that serves Concord: ducted and ductless heat pumps, air handlers and ductwork.

White ductless wall head mounted high on a wall in a finished room
Small heat pump condenser on a pad outside a house
Round smart thermostat displaying settings on a wall
Air handler in a finished mechanical closet with a white condensate drain line
Mitsubishi ductless outdoor unit mounted beside a home's gray siding
Wall-mounted ductless indoor head in a clean finished room

A hot-summer market

Concord’s 97°F design day changes how we size, select and duct a heat pump

Concord’s cooling design temperature is about 97°F, roughly five to seven degrees above much of the Bay. A system sized from a coastal rule of thumb often falls short here, and the problem shows up on the hottest afternoons.

We run Manual J with real attic insulation, window orientation and duct location. In Manual S, we check capacity at hot outdoor temperatures, not just nameplate ratings. In Manual D, we make sure the ducts can move the airflow the cooling load needs.

Winters are mild with a 27°F design low. Heating rarely drives the selection, so we can focus on cooling performance without worrying about cold-climate limits.

  • Hot attics

    Attic temperatures well over 120°F in summer cut duct performance. Sealing and insulation make a measurable difference.

  • West-facing and garage-top rooms

    These rooms absorb afternoon sun. Manual J shows how much extra airflow they need.

  • Electric rate plans

    Heavy summer cooling use makes rate plan selection worth reviewing when you add a heat pump.

  • Older tract-home panels

    Many Concord homes have modest panels. We check capacity before specifying equipment.

Concord heat pump design

Concord summers set the bar, so cooling capacity comes first

Concord is one of the hottest places in the East Bay. Afternoons regularly push past the mid-90s while winter nights stay mild. That reverses the usual heat pump question: we are less worried about whether it will heat in January and more focused on whether it will keep up in July.

Design climate · Title 24 Climate Zone 12
Winter design temp
27°F
Summer design temp
97°F

Concord’s Manual J design conditions are 97°F for cooling and 27°F for heating, about 5 to 7 degrees hotter in summer than most of the Bay. A system sized for coastal conditions will fall short here. We also check capacity at that high outdoor temperature, since output of any heat pump declines as it gets hotter.

ACCA Manual J design data · Concord, CA (ACCA micro-climate; matches the Concord/Antioch station)

Concord homes and what they ask of a system

Much of Concord is tract housing from the 1950s through the 1980s: single-story ranches, two-story family homes and clusters of townhomes. Many have attic ducts and a gas furnace paired with a separate central AC.

In summer, attic temperatures climb well above 120°F in these homes, which punishes ducts and drops delivered capacity. West-facing rooms and rooms above garages are the usual trouble spots.

Concord also has a large number of condos, mobile homes and older bungalows near downtown, where available space and electrical capacity vary widely.

Manual J at 97°F

At this design temperature, attic insulation, window shading and duct location add up quickly. Our Manual J reflects those details, and it tends to show a larger cooling than heating load.

Manual S and high-ambient capacity

We look at the manufacturer’s capacity tables at 97°F outdoor, not just the rated 95°F number. Some units lose more capacity in extreme heat than others, which affects which model we select.

Attic ducts that bake

We evaluate whether to seal and add insulation to existing attic ducts, or relocate them into a conditioned space when the remodel allows. Either change can lift delivered cooling noticeably.

Shading and the outdoor unit

A condenser in full afternoon sun on a hot day works harder. When we can, we place it on a shaded side with airflow clearance.

  • High-capacity cooling replacement

    Replace an aging central AC and gas furnace with a heat pump that holds up on 100°F afternoons.

    Heat pump installation →
  • Full system and duct replacement

    Equipment, ducts, returns and electrical redone as one coordinated job.

    Replacement & conversion →
  • Load calcs for hot-climate sizing

    Manual J for homes where summer loads, not winter, determine the equipment.

    Manual J load calculations →
  • New construction and infill

    HVAC design for new homes and ADUs, with Title 24 compliance in mind.

    HVAC for new construction →
  • Smoke and heat-day air quality

    Filtration and ventilation to keep indoor air clean when windows must stay closed.

    Ventilation & IAQ →
  • Financing and rebates

    How we help you find incentives and finance larger projects.

    Financing →
  • Diamond Contractor installation

    Mitsubishi-certified installation with extended coverage on eligible systems.

    Diamond Contractor →

Concord permits, MCE and rebate programs

The City of Concord Building Division issues mechanical and electrical permits for residential HVAC. We provide load calculations, equipment data and the site plan needed for submittal.

Concord receives generation through MCE Clean Energy, and PG&E handles delivery and billing. Because Concord homes use more air conditioning than many Bay communities, electric rate plan and time-of-use choices are worth a look when sizing a heat pump. Incentive programs change, so we check what is open at the time of your quote.

Areas we serve in Concord

Downtown near Todos Santos Plaza, the Monument corridor, Sun Terrace, Clayton Valley and surrounding neighborhoods, plus Pleasant Hill, Martinez and Walnut Creek.

Homeowner reviews

Trusted by Bay Area Homeowners

5.0
5 out of 5 stars from 207 Google reviews

207 Google reviews

  • Mitsubishi Electric outdoor heat pump installed on a concrete pad at a Bay Area home Expand
    Mitsubishi mini-split installed with outstanding care. Indoor and outdoor units done right. High efficiency meant a meaningful federal tax credit too.
    Gary Marks Google review
  • Mitsubishi Electric Smart Multi outdoor unit wall-mounted on a residential exterior Expand
    Devin and his crew did a fantastic job installing AC for our whole house. High quality Mitsubishi equipment and a clean installation throughout.
    Christian Vuerings Google review
  • Mitsubishi Electric air handler installed in an insulated attic with sealed duct connections Expand
    Devin is meticulous, methodical, and knowledgeable. Professional crew and a heat pump install we trust completely.
    D C Google review

Photos from the installs above

Read all 207 reviews

Our Concord approach

A process built around summer performance

Each step answers the same question: will the system keep this house comfortable on the hottest afternoon of the year?

01 — Heat audit

We inspect the attic, ducts, windows and sun exposure, and find the rooms that struggle on hot days.

02 — Manual J at 97°F

Cooling and heating loads calculated for Concord design conditions, room by room.

03 — Manual S at high ambient

Equipment compared using capacity tables at hot outdoor temperatures, not just rating conditions.

04 — Manual D and permit

Ducts sized for the airflow and a permit package prepared for the City of Concord Building Division.

05 — Installation

Ducts sealed, equipment set, line sets and electrical completed, with the outdoor unit placed for shade and airflow.

06 — Verification

We measure airflow, charge and temperature split and document the results.

Install to inspection

What a Concord heat pump replacement covers

We handle the equipment, the ducts, the electrical and the permit so you do not have to coordinate. We also check that the system performs on a hot day, not just on a mild startup day.

You get a written summary of what was installed and measured.

Tell us about the project
  • Permit and prep

    City permit pulled and attic or pad area prepared.

  • Duct sealing and insulation

    Attic ducts sealed and insulated, returns corrected.

  • Equipment install

    Air handler, outdoor unit and line sets set and connected.

  • Hot-day verification

    Airflow, charge and temperature split measured and recorded.

Cost

What a Concord heat pump replacement costs, and what changes the price

In Concord, duct condition and cooling capacity are the big drivers. Sealing and insulating attic ducts, adding returns, upgrading the panel and handling multiple systems or zones change the scope more than equipment brand does.

Ducted heat pump, existing ducts usable $20k–$30k Equipment tier, capacity, controls, condenser location and access
Ducted heat pump + duct repair or resizing $25k–$45k Amount of ductwork replaced, crawlspace or attic access, return-air changes
Ductless multi-zone, 3–4 heads $25k–$40k Head type, line-set length, routing, concealment and finish conditions
Whole-home ducted + ductless combination $40k–$80k+ Multiple systems, zoning, ductwork, filtration, ventilation and architectural coordination
New construction system $20k–$50k+ Building size, system count, Title 24/design requirements and coordination with the build
ADU system $10k–$15k Zone count, head type, line-set routing, and whether the ADU shares the main house or stands alone
Electrical panel upgrade, when required $10k+ Service size, meter location, utility requirements and site conditions

Prices as of November 2026. Complex whole-home and design-build projects can exceed these ranges. Rebates and incentives may reduce your net project cost.

Project inquiry

Starting an HVAC project in Concord?

Tell us about the home, the rooms that run hot and what you have now. We will tell you what the numbers suggest.

  • Reviewed by a project lead, not a dispatcher
  • We tell you if your scope is not a fit for us
  • No high-pressure in-home sales appointment

Project Inquiry

Send your project details

Project type, ZIP, timeline, and how to reach you.

We design and install complete systems in the East Bay, San Francisco and Marin. We do not do repair, service calls or maintenance.

Mitsubishi Electric

Proud Mitsubishi Electric Diamond Contractor

As a Mitsubishi Electric Diamond Contractor, we design and install ducted, ductless, and multi-zone systems for Bay Area homes, with factory-trained crews and longer warranty options on qualifying residential installs.

Mitsubishi is not automatically the answer to every home. We start with what the project requires and recommend the system that makes sense.

Mitsubishi Electric H2i hyper-heat outdoor heat pump units
Mitsubishi Electric Heating and Air Conditioning Mitsubishi Electric Diamond Contractor

12 Year Parts &
Compressor Warranty

12-year warranty

Extended parts & compressor coverage on qualifying Diamond installations.

Factory-trained crews

Ongoing manufacturer training on the latest hyper-heat systems.

Priority support

Direct factory escalation if anything ever needs attention.

FAQ

Common Questions

Answers about Concord cooling loads, attic ducts, permits and power.

Why does Concord need more cooling capacity than the coast?

Concord’s summer design temperature is about 97°F, noticeably hotter than coastal Bay Area cities. Manual J reflects that with higher cooling loads.

Will my heat pump lose capacity when it is 100°F?

Every heat pump loses some capacity as it gets hotter. We select equipment using capacity data at the design temperature so there is margin on hot days.

Are my attic ducts hurting my cooling?

Likely, if they are leaky or poorly insulated. We test and often fix them before or while installing new equipment.

Which agency handles permits for HVAC in Concord?

The City of Concord Building Division. We prepare the mechanical permit and any electrical permits that accompany the work.

Who supplies electricity generation in Concord?

MCE Clean Energy provides generation, and PG&E delivers it. We also check current heat pump incentive programs when we scope your project.

Can a heat pump replace both my furnace and AC in a tract home?

Yes. One ducted heat pump handles heating and cooling, and we size it from a load calculation rather than copying the old equipment.

Do I need a panel upgrade?

Not always. Many right-sized heat pumps fit existing panels. We calculate your service load before recommending an upgrade.

My windows are closed for smoke. How do I keep the air fresh?

Higher-grade filtration and ventilation such as an ERV can be added to the system so you can stay sealed without losing air quality.

Still have a question?

Tell us about your Concord project

Discuss Your Project

Project Inquiry

Ready to Talk Through Your Concord Project?

Tell us what you’re planning. We’ll review the project and follow up with the appropriate next step.

We design and install complete systems in the East Bay, San Francisco and Marin. We do not do repair, service calls or maintenance.

Project category
Project type
Timeline